1956 Johnson

Home › Forum › Ask A Member › 1956 Johnson

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 15, 2019 at 4:46 pm #177301
    jukeboxtim
    Participant

      Looking for a new reproduction or NOS Johnson part number 303537 carb face plate rubber grommet for my 1956 Johnson 10 hp motor . Also looking for a nice pair of Starcraft emblems for my 1963 Starcraft comet fiberglass boat overall length 14.5 inches with 4 screw holes.Thanks Tim

      • This topic was modified 4 years, 10 months ago by jukeboxtim.
      June 15, 2019 at 4:52 pm #177302
      bobw
      Participant

        US Member

        North York Marine has excellent quality replacement grommets including the one you need. Note on their home page the owner is out of town and not taking orders until he returns in early July.

        http://www.nymarine.ca/grommets.htm

        Bob

        1937 Champion D2C Deluxe Lite Twin
        1954 Johnson CD-11
        1957 Evinrude Fastwin 18
        1958 Johnson QD-19
        1958 Johnson FD-12
        1959 Johnson QD-20

        “Every 20 minute job is only a broken bolt away from a 3-day project.”
        "Every time you remove a broken or seized bolt an angel gets his wings."

        June 15, 2019 at 6:41 pm #177308
        dan-in-tn
        Participant

          US Member

          I have a set of StarCraft emblems just pulled off a boat. Not nice, but would serve as patterns for a mold. You are welcome to them just for shipping. Believe I have screws too!
          If you do FB there is a guy on the Tee Nee trailer group that has made a mold for the trailer fender emblem and is making some good pieces. Just an idea.

          Dan in TN

          June 15, 2019 at 7:48 pm #177311
          jukeboxtim
          Participant

            Dan Any chance you can send me a photo of the emblems you have. Thanks Tim

            June 15, 2019 at 7:56 pm #177312
            jukeboxtim
            Participant

              Bob Thanks for the info on the rubber grommet for my Johnson 10 hp outboard . I will order one early next month. Tim

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.