I am finally getting my carb on 5hp Buccaneer back together. According to the old outboard diagram It shows 2 shims between the reeds. i only have one and I am wondering if the previous owner lost one, etc. Is there a feeler gauge I can use between the dimpled one and the flat to determine what it should be or is the documention just saying shims because it could be one or two or three.
This motor was burning lots of fuel. i figured I would clean the carb and try adjusting as a first step but am wondering if this reed situation could also be a problem?
the model of engine is. Buccaneer Outboard Motor Section. model is 5D10B. Made by Gale a division of OMC. 1951 to 1954
Any help is appreciated.