1960 evinrude sportwin 10hp

Home › Forum › Ask A Member › 1960 evinrude sportwin 10hp

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • November 13, 2019 at 5:37 pm #187114
    dietzer
    Participant

      Hello, ive been trying to find out where i can purchase a new gasket for the shift rod connector. Part # 305299. Ive looked on Marineengine.com,ebay,amazon, and vintageoutboard.com. No luck, maybe i’m missing it. If anyone has any suggestions, i’d appreciate it, thank you.

      November 13, 2019 at 6:14 pm #187115
      squierka39
      Participant

        US Member

        Try Ken Hall, he’s got loads of that kind of stuff. Ken, are you out there?

        November 13, 2019 at 6:29 pm #187121
        Steve D
        Participant

          One left, searched with a zero in front and found it, $6.97 w/shipping. Or use the cover plate as a template and make one from rubber/cork gasket material.
          https://www.ebay.com/itm/T36-Evinrude-Johnson-OMC-0305299-Gasket-OEM-New-Factory-Boat-Parts/312345512046?epid=1550238919&hash=item48b93e486e:g:ussAAOSwB9FcAN2Z

          0305299

          November 13, 2019 at 6:58 pm #187130
          dietzer
          Participant

            Thank you, i saw Steve Ds response, he sent me a link to the part on ebay. I was missing a 0 in front of the part # i listed. i appreciate the help, thanks.

            November 13, 2019 at 7:08 pm #187132
            dietzer
            Participant

              Thanks Steve D, i placed the order on ebay. Thanks for your help!

              November 13, 2019 at 9:59 pm #187142
              Steve D
              Participant

                You’re welcome.

                November 14, 2019 at 10:13 am #187157
                fleetwin
                Participant

                  US Member - 2 Years

                  Cool, didn’t realize this gasket is NLA…

                  November 14, 2019 at 2:54 pm #187175
                  fisherman6
                  Participant

                    US Member - 2 Years
                    fleetwin wrote:

                    Cool, didn’t realize this gasket is NLA…

                    I didn’t either. I guess I’ll start making some. I need a few of them and I’m sure I’ll need more with as many project motors as I have ahead of me with this cover..
                    -Ben

                    OldJohnnyRude on YouTube

                  • Author
                    Posts
                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.