1920 rowboat motor

Home › Forum › Ask A Member › 1920 rowboat motor

Viewing 10 posts - 1 through 10 (of 23 total)
1 2 3
  • Author
    Posts
  • August 28, 2021 at 10:33 pm #245665
    lakeofwoods
    Participant

      Could someone help me out with a service manual for a evinrude rowboat motor

      August 29, 2021 at 6:14 am #245671
      RICHARD A. WHITE
      Participant

        Lifetime Member

        Are you looking for parts?, starting instructions????

        http://www.richardsoutboardtools.com
        classicomctools@gmail.com

        August 29, 2021 at 10:38 am #245679
        lakeofwoods
        Participant

          Well I’m just getting into the start of restoring it . So I’m looking to at least partially dismantle it . I’m not sure if they made a manual for this or did you just have to follow the parts book . Example, removed the 2 nuts holding the prop on and prop still won’t come off . Don’t want to break anything. Thanks for the reply

          August 29, 2021 at 11:30 am #245684
          Tubs
          Participant



            If you have removed this collar and the
            shear pin underneath its just stuck.
            Tubs

            A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

            • This reply was modified 4 years, 6 months ago by Tubs.
            • This reply was modified 4 years, 6 months ago by Tubs.
            August 29, 2021 at 11:57 am #245687
            lakeofwoods
            Participant

              I have not removed the collar , I’m assuming a flat screw driver and pry ! . Will try ! Thanks . I suspect that I will be looking for further help as I go , did they make a manual for these ?

              August 29, 2021 at 5:22 pm #245708
              lakeofwoods
              Participant

                Well that worked awesome

                August 29, 2021 at 9:05 pm #245740
                Tubs
                Participant



                  This is the rest of the gear case.
                  You get to the set screw here.
                  Tubs

                  A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

                  August 29, 2021 at 11:31 pm #245753
                  lakeofwoods
                  Participant

                    Thanks for the bottom end picture . I’ll start there and make my way up !

                    August 30, 2021 at 9:08 am #245761
                    Tubs
                    Participant



                      The length of these motors are adjustable.
                      Loosen these 4 bolts and this assembly will
                      come out. It can be a challenge though
                      depending the condition of the motor. One
                      issue is often a twisted driveshaft having a
                      damaged keyway from hitting something.
                      Tubs

                      A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

                      August 30, 2021 at 10:49 am #245765
                      lakeofwoods
                      Participant

                        Thank you for the information 🙏

                      • Author
                        Posts
                      Viewing 10 posts - 1 through 10 (of 23 total)
                      1 2 3
                      • You must be logged in to reply to this topic.