Home › Forum › Ask A Member › 1920 rowboat motor
- This topic has 22 replies, 5 voices, and was last updated 4 years, 3 months ago by
Tubs.
-
AuthorPosts
-
September 25, 2021 at 3:05 pm #247222
Coil wire is my next challenge !!! Lol any diagram available perhaps thanks again no primary wire or secondary lead .
September 25, 2021 at 3:13 pm #247223Here is a picture of stator assembly
September 25, 2021 at 3:17 pm #247225Motor to date
September 25, 2021 at 6:34 pm #247238Here is a picture of stator assembly
That’s an interesting coil. I don’t think an OMC universal coil
will swap on that one, lol.Motor is looking nice, but wish the photos were bigger.
Prepare to be boarded!
September 25, 2021 at 8:46 pm #247243
Occasionally the coil is found to be good on these
but its not very often and most likely yours has
failed as well. Most people use a model T Ford
buzz coil to get them running again. They’re
plentiful and relatively inexpensive.
TubsA "Boathouse Repair" is one thats done without having tools or the skills to do it properly.
September 25, 2021 at 9:28 pm #247247On behalf of the OP and our community, thanks Tubs for your always most helpful posts.
And while I’m at it, here is a schematic for how to rig the Model T buzz coil. As a bonus the home made capacitor tester on there too.Joe B
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
-
This reply was modified 4 years, 3 months ago by
joecb.
September 25, 2021 at 9:36 pm #247266September 26, 2021 at 11:34 am #247298Thanks again for the info ! Another fellow has sent me a diagram for a buzz coil
September 26, 2021 at 11:36 am #247299Thanks for the diagram ! I think I have a coil . Will send a picture
September 27, 2021 at 8:57 pm #247393In my search for a buzz coil in my stock pile of parts I found this coil . A Wells MFG Co coil Wisconsin . Can anyone identify it ?
-
This reply was modified 4 years, 3 months ago by
-
AuthorPosts
- You must be logged in to reply to this topic.

