1922 Elto ruddertwin

This topic has 3 replies, 3 voices, and was last updated 2 years ago by joecb.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
November 2, 2023 at 3:32 pm #282224
Jim Lockwood
Participant
Hello all!

I’m attempting to remover the lower unit and have removed the 4 bolts that attach it to the block. Is there any other fastener that needs to be removed for it to separate? I can’t seem to see anything hold it on but can’t get it to come apart? Any suggestions would be great!

Jim Lockwood/ Iowa
November 2, 2023 at 7:39 pm #282233
Jim Lockwood
Participant
Just to let everyone know I figured it out by discovering a similar manual on this site! The cam roller for the water pumps set screw also pins the crank shaft to the lower unit drive shaft!
But thank you to this club archives to help us new members

Jim
November 2, 2023 at 9:43 pm #282235
labrador-guy
Participant
US MEMBER PAY BY CHECK
Welcome to our website! Glad you got it figured out and shared it with us. We are all learning here and our members are willing to help out if they can. Next rudder twin I work on I will know how to take it apart. That is if I remember!

dale

get’em wet….don’t let’em set!
November 2, 2023 at 9:55 pm #282236
joecb
Participant
US MEMBER PAY BY CHECK
There is a lesson here… don’t resort to the big hammer, stop, think and seek help. And yes, we are all learning here.

Thanks for sharing

Joe B
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.