Well one tab broke off of my coil. I had an old coil that I took off that was no good so I took a soldering gun and took a tab off of the bad coil and I filed the pin that the wire from the coil connects to it on the bottom flat and then I tinned it and soldered it over the the old piece of tab still on the coil. Well put it all together and I have spark on both plugs now. Thanks to everyone that helped. I put the wires in with plastic compression fittings and o rings as suggested. Going to clean foot this weekend and repack it with grease. I would like to thank all for all the great help here.
Regards, Robert Clark.
A local repair shop said I can bring it down and put it in their tank next weekend to see if we can get it running. I am going to take a vidio. When I finish the foot I am going to polish again. Been awhile.
Robert Clark