1936 johnson model 100 flywheel removal

Home › Forum › Ask A Member › 1936 johnson model 100 flywheel removal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 17, 2019 at 10:29 am #175428
    second wind
    Participant

      I just purchased a 36′ Johnson model 100 1.7 hp. and would like advise on best method to remove flywheel (I have the flywheel nut removed) is it best to utilize the (3) rope pulley mounting screws and a puller or is it ok to reinstall the flywheel nut partially and rap on it with a hammer? I appreciate your time and consideration.
      Best regards,
      Neal

      May 17, 2019 at 11:15 am #175436
      Tubs
      Participant

        A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

        • This reply was modified 4 years, 4 months ago by Tubs.
        May 17, 2019 at 11:38 am #175438
        second wind
        Participant

          Many thanks!

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.