Home › Forum › Ask A Member › 1940 Champion model B1F
- This topic has 25 replies, 4 voices, and was last updated 3 years, 8 months ago by
ml_mcm.
-
AuthorPosts
-
May 22, 2022 at 12:58 am #260251May 22, 2022 at 6:39 am #260264
Thanks so much. This should give me everything I need to know. Huge help.
May 22, 2022 at 7:29 am #260267Buccaneer-You don’t have a picture of that throttle connection before the tank is installed do you?
May 22, 2022 at 8:31 am #260268May 22, 2022 at 7:06 pm #260333May 22, 2022 at 10:26 pm #260348May 23, 2022 at 10:09 am #260368The 1940 Blue Streak is suppose to have an AJ-2A.
The MS 85 C showed up on several earlier Champions as shown in the list.I appreciate all this help and information. Wondering now if there is such a model that has the tear drop tank like the B1F but this older carb or might I have some sort of frankenmotor? In looking up those early motors with the carb, they all had tank like the D1D. Exactly where can I find the model #? There are several markings but most look like PNs for specific parts
May 23, 2022 at 10:16 am #260369Here is a picture of the entire motor and tank if this helps (I can get better pictures when I get home if needed) and is it safe to assume that I’m definitely missing the part to coil the rope around?
May 23, 2022 at 1:55 pm #260375Look at my posted cover picture, it shows where the serial number is located, near/behind the handle area on the edge. The first 3 digits should be B1F for a Blue Streak Single.
May 23, 2022 at 3:13 pm #260377Look at my posted cover picture, it shows where the serial number is located, near/behind the handle area on the edge. The first 3 digits should be B1F for a Blue Streak Single.
Thanks. I’m missing the Bracket, tiller, carry handle so as long as it’s not on one of those I’ll check it when I get home
-
AuthorPosts
- You must be logged in to reply to this topic.




