1941 Neptune Muncie Rings

Home › Forum › Ask A Member › 1941 Neptune Muncie Rings

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 8, 2021 at 10:44 am #227220
    NeptuneMadness
    Participant

      Can anyone tell me what the Ring Gap is for a 1941 Neptune Muncie 1.5hp? I finally found rings that are nearly the right size, but I still need to trim them a little bit. And I have no idea what the gap clearance should be when you place them in the cylinder to test fit. One step closer to getting the head put back together!!

      January 8, 2021 at 10:54 am #227221
      Tubs
      Participant

        .

        A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

        • This reply was modified 4 years, 6 months ago by Tubs.
        • This reply was modified 4 years, 5 months ago by Tubs.
        January 8, 2021 at 10:55 am #227222
        Tubs
        Participant

          .

          A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

          • This reply was modified 4 years, 6 months ago by Tubs.
          • This reply was modified 4 years, 6 months ago by Tubs.
          • This reply was modified 4 years, 6 months ago by Tubs.
          January 9, 2021 at 7:04 pm #227319
          NeptuneMadness
          Participant

            Thank you sir!

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.