1947 Johnson TD 20 or TN 26 pawls

Home › Forum › Ask A Member › 1947 Johnson TD 20 or TN 26 pawls

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 28, 2021 at 8:51 am #237293
    mark w
    Participant

      Looking for pawls and the connecting ring for these two motors. I think they are the same parts. Any idea where I can get them? Canada is a ghost town for parts.

      00EFD50A-C559-40C9-84C8-62FD46D53522

      17C43103-0D65-4B4B-9C4A-483F02B0B186

      • This topic was modified 4 years, 6 months ago by Mumbles.
      April 28, 2021 at 9:29 am #237297
      aquasonic
      Participant

        Might be better off just buying the entire assembly with the sheave. That way you get everything including the delicate pawl springs. Always good to have backup parts. There are lots of parts for these motors. Try placing an add on our classifieds section.

        Improvise-Adapt-Overcome

        April 28, 2021 at 10:28 am #237299
        crosbyman
        Participant

          Canada Member

          try tims outboard https://www.timsoutboard.com/ nice folks prices not to bad in my experience other sites available

          check links

          https://www.aomci.org/resources/links/

          Joining AOMCI has priviledges 🙂

          • This reply was modified 4 years, 6 months ago by crosbyman.
          April 28, 2021 at 11:37 am #237302
          stanley
          Participant

            US Member

            Make then

            April 28, 2021 at 12:29 pm #237308
            Mumbles
            Participant

              Or try placing an ad on the MLC site. They are Canadian!

              https://www.mlaoc.ca/buy-sell-trade.html

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.