1948 SeaKing 5 hp

Home › Forum › Ask A Member › 1948 SeaKing 5 hp

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 9, 2022 at 10:43 am #257803
    Terrence McMahon
    Participant

      US MEMBER PAY BY CHECK

      Does anyone know of a source for a carb. rebuilding kit for my motor. The model is 84GG9014A.

      The compression is 75 psi in each cylinder and has good spark at each cylinder after cleaning the points and setting the lamination clearances from the rotor.

      Also I bought two NOS coils which I don’t need. The P/N is 375189. These were also used on the OMC TD and TN model motors

      Thanks

      April 9, 2022 at 1:07 pm #257810
      frankr
      Participant

        I don’t know of any “kit”.  Tou pretty much make your own.  Fortunately, it is easy.  I modify a Sierra/Mercury float, Sierra # 18-7208.  The packing for the HS needle was made of leather.  Standard OMC packing won’t hold up because of the frequent turning of the needle.  I make my own from an old leather belt.

        1 user thanked author for this post.
        Terrence McMahon
        April 13, 2022 at 11:05 am #258161
        Terrence McMahon
        Participant

          US MEMBER PAY BY CHECK

          Thanks for the reply.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.