1949 Johnson 16hp Model SD-20
Home › Forum › Ask A Member › 1949 Johnson 16hp Model SD-20
Tagged: 1949 Johnson 16 Model SD-20
- This topic has 26 replies, 8 voices, and was last updated 2 years, 1 month ago by
davidk.
-
November 25, 2020 at 1:57 pm #221581
Looking for parts for this outboard – it likely was dropped and some parts are broken. I’ve gotten nowhere
with the places I’ve gone, including the Johnson technical advisors (no response at all). Need a recoil assembly,
magneto lever, exhaust manifold and several other parts. Parts motor would be great. Hopefully somewhere
in the midwestNovember 25, 2020 at 4:27 pm #221596Have you checked with Doug/Matt Penn? i picked up a tiller handle from him a while back maybe he has some more parts.
dale
November 25, 2020 at 4:37 pm #221599Haven’t checked there – will. Thanks!
November 25, 2020 at 6:34 pm #221602You close to southern Wisconsin?
https://madison.craigslist.org/bpo/d/juda-johnson-seahorse/7226087612.htmlNovember 25, 2020 at 6:45 pm #221603I’m in Southern Minnesota – will try to lock into that one. I can see three parts I need in the photo. Thank you!
November 26, 2020 at 9:36 am #221627A couple years ago I saw quite a few parts for the SD20 still available at marine engine.com.
Check it out.
David Bartlett
Pine Tree Boating Club Chapter"I don't fully understand everything I know!"
November 27, 2020 at 10:31 am #221708I will check Marine engine.com. Thanks for the lead – haven’t checked there for some time.
November 27, 2020 at 10:57 am #221713Another site to try is ganotech@mchsi.com. Dan sells old new stock for OMC products. 712-336-3297 & Dan is a nice guy!
-
This reply was modified 2 years, 2 months ago by
jeff-register.
-
This reply was modified 2 years, 2 months ago by
jeff-register.
November 27, 2020 at 12:55 pm #221735Checked with Doug Penn and Marine Engine.com, and neither have parts for this motor. .
November 27, 2020 at 6:15 pm #221753That Craigslist parts motor looks like a great deal; it even has the very rare brass medallion in the tiller handle.
I restored one last winter and love it; runs like a dream!November 27, 2020 at 11:53 pm #222527YES, I agree! Going to hook up with him as soon as I can. That medallion is one I also need! Thanks to each of the responders-I have followed up with each but find this parts motor the one
with the most possibilities.November 29, 2020 at 12:05 am #223910Oh Man! I have a long way to go. Can’t wait to get mine running, and then to finish. Yours is beautiful!
November 30, 2020 at 9:31 am #223962Here is a link to a video of my SD-20 running on Lake Christopher in Maine a few years back. These are a lot of fun to run.
David Bartlett
Pine Tree Boating Club Chapter"I don't fully understand everything I know!"
-
This reply was modified 2 years, 2 months ago by
- You must be logged in to reply to this topic.