1955 Champion Majestic M-2N head gasket leaks

This topic has 3 replies, 2 voices, and was last updated 9 years, 6 months ago by chris-p.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
February 20, 2016 at 5:17 pm #3667
fishingnuts
Participant
Was able to fire up the champion today and found out the head gasket leaks, not getting into the cylinder, but leaks water around the head bolts.
Anyone know where I could find a new head gasket, or material to make one.
February 20, 2016 at 7:24 pm #32206
fishingnuts
Participant
Went to autozone, purchase some good gasket sealer, cleaned up the old gasket and putter back together. Let the gasket sealer set over night, I should
be back in business. Had water in the gear case so I’m working on getting the upper seal just below the water pump, it held pressure, but with the shaft turning, the seal went. Again, that the kinda luck I have.
February 21, 2016 at 1:13 am #32225
fishingnuts
Participant
Needing a water pump impeller, now looking for one. Any help would be appreciated. Flyingscottoutboards not making this one.
February 21, 2016 at 2:08 am #32227
chris-p
Participant
Tom,

Glad the prop shaft seals worked out!

Ill send the drive shaft seal on Monday.

Im not sure if I have an impeller but will look see. Post a wanted ad in the classifieds for one as well.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.