1955 Evinrude 30hp Lark Shift Rod bushing

Home › Forum › Ask A Member › 1955 Evinrude 30hp Lark Shift Rod bushing

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 15, 2016 at 5:51 am #5259
    randy
    Participant

      Hello,

      I’m having trouble locating this bushing. The diameter is 11/16 inch and the height is 19/32 inch. It has an inner lip. I also need the rubber o-ring seal, and I believe a rubber washer that the bushing mounts on. Thanks for pointing me in the right direction!

      Randy

      Attachments:

      September 15, 2016 at 9:24 am #44064
      chris-p
      Participant

        Ill send you a PM>

        September 15, 2016 at 1:46 pm #44071
        chas56x
        Participant

          US Member

          You can find your bushing and O-ring here:

          http://www.marineengine.com/parts/johns … Case+Group

          The part that is Iisted is for a 35hp but they are all the same bushing for the 25 through 35hp models.

          September 15, 2016 at 5:43 pm #44085
          1946zephyr
          Participant

            Those are easy to come by. When someone has a bad gearcase, they’ll pop those out and stash them for parts collections.

            September 16, 2016 at 7:03 am #44134
            randy
            Participant
              quote chas56x:

              You can find your bushing and O-ring here:

              http://www.marineengine.com/parts/johns … Case+Group

              The part that is Iisted is for a 35hp but they are all the same bushing for the 25 through 35hp models.

              Thank you very much for the tip. Marineengine had it all. Thanks!

              September 16, 2016 at 10:02 am #44137
              RICHARD A. WHITE
              Participant

                Lifetime Member
                quote 1946Zephyr:

                Those are easy to come by. When someone has a bad gearcase, they’ll pop those out and stash them for parts collections.

                shhhh…..the other hoarders will hear you…LOL

                http://www.richardsoutboardtools.com
                classicomctools@gmail.com

                September 16, 2016 at 11:46 pm #44154
                1946zephyr
                Participant
                  quote Richard A. White:

                  quote 1946Zephyr:

                  Those are easy to come by. When someone has a bad gearcase, they’ll pop those out and stash them for parts collections.

                  shhhh…..the other hoarders will hear you…LOL

                  Oops. Sorry. 😀 😀 😀 Its okay, I think the poster will greatly appreciate our help. I wouldnt go through marineengine.com though, you’ll pay more than what most would charge you.

                • Author
                  Posts
                Viewing 7 posts - 1 through 7 (of 7 total)
                • You must be logged in to reply to this topic.