1957 johnson 35hp outboard

Home › Forum › Ask A Member › 1957 johnson 35hp outboard

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 24, 2021 at 2:59 pm #232094
    deeretruck
    Participant

      US Member

      I have the original wiring harness (external) for this engine but is in bad shape. The boat is a 1956 barbour with electric start. No generator. Any wiring drawings would be great or any resources. I would even consider to send the wiring out to be restored. The boat is fully restored, been in the family since new.
      Thanks Jeremy Taylor

      February 24, 2021 at 3:18 pm #232100
      reivertom
      Participant

        US Member

        If it was a motor I intended to keep like yours, I’d bite the bullet and buy a proper harness from here: http://www.nymarine.ca/wiringharness.htm

        • This reply was modified 4 years, 8 months ago by reivertom.
        1 user thanked author for this post.
        deeretruck
        February 24, 2021 at 4:06 pm #232105
        Mumbles
        Participant

          Wiring_1957_35hp_no-generator

          1 user thanked author for this post.
          deeretruck
          February 24, 2021 at 6:08 pm #232115
          outbdnut2
          Participant

            US Member

            If your 1956 boat has a 1956 Johnson/Evinrude starter solenoid, it changed from 6 to 12 Volts in 1957. If you need one, Sierra marine #18-5807 is the 12 volt part.

            Dave

            1 user thanked author for this post.
            deeretruck
          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.