Topic: 1959 Evinrude Fastwin 18hp 15028 – Antique Outboard Motor Club,Inc

This topic has 10 replies, 8 voices, and was last updated 9 years, 8 months ago by chris-p.

Viewing 10 posts - 1 through 10 (of 11 total)

1 2 →

Author

Posts
August 28, 2015 at 12:06 am #2375
tiemann66
Participant
I am looking for a shift cradle. I found one on eBay that is for a 15hp Evinrude / 15012-06624. I am wondering if this will work on the 18hp Evinrude? I can’t seem to find any info on it or part numbers without buying an expensive parts manual. I have the service manual and I know the 5hp to 25hp lower unit are covered under the same section. If anyone can let me know that would be great.

Thank you!
August 28, 2015 at 12:34 am #22795
wedgie
Participant
Here’s a link with free parts manuals .

http://www.marineengine.com/parts/johns … -parts.php
August 28, 2015 at 12:35 am #22796
frankr
Participant
US MEMBER PAY BY CHECK
It just so happens that the two motors mentioned use the same cradle, part number 302500
August 28, 2015 at 12:39 am #22797
frankr
Participant
US MEMBER PAY BY CHECK
Holy crap, marineengine wants 70 bucks for it. I’ll bet somebody here has one for a lot less. I probably do, if I go through my stash.
August 28, 2015 at 12:55 am #22798
mr-asa
Participant
quote FrankR:

Holy crap, marineengine wants 70 bucks for it. I’ll bet somebody here has one for a lot less. I probably do, if I go through my stash.

First eBay result only wants $25 with free shipping, might be able to find it cheaper if one were to keep digging
http://www.ebay.com/itm/NOS-or-Used-Joh … 1819302341
August 28, 2015 at 1:09 am #22800
ede
Participant
US MEMBER PAY BY CHECK
tiemann66, just sent you a PM
August 28, 2015 at 4:36 pm #22835
tiemann66
Participant
I would like to find the shift dog and bushings if possible for this unit as well. The gears are in great shape and the shift dog has a little wear but the cradle definitely needs to be replaced.

quote Wedgie:

Here’s a link with free parts manuals .

http://www.marineengine.com/parts/johns … -parts.php

This link did not bring up any parts list for my unit.
August 28, 2015 at 5:27 pm #22838
dan-in-tn
Participant
US Member
When that happens I just use the parts diagram the year before and year after to compare part numbers. If they jive then I am happy. In this case the reverse gear bushing is #303997, forward gear bushing is #391018 $$, & shifter is #305191. I would look on Ebay for someone listing a NOS shifter since a new one is pricey. Same with that foward gear bushing. Hope that helps!

Dan in TN
August 28, 2015 at 6:20 pm #22840
tiemann66
Participant
quote t2stroke:

When that happens I just use the parts diagram the year before and year after to compare part numbers. If they jive then I am happy. In this case the reverse gear bushing is #303997, forward gear bushing is #391018 $$, & shifter is #305191. I would look on Ebay for someone listing a NOS shifter since a new one is pricey. Same with that foward gear bushing. Hope that helps!

Dan in TN

Thanks Dan!
August 30, 2015 at 4:59 pm #22914
mogems-yahoo-com
Participant
I have a 1959 Johnson 18hp. Breaking up for parts w/bad power head. Send me a pic with maybe a part # thru email or text to 609-381-2607. Thanks, George 856-447-3641
Author

Posts