Topic: 1960 Johnson 10 HP Bearing Housing – Antique Outboard Motor Club,Inc

This topic has 4 replies, 4 voices, and was last updated 2 years, 11 months ago by ede.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
February 22, 2023 at 10:33 am #273021
MICHAEL LENZUOLO
Participant
US MEMBER PAY BY CHECK
Good morning,

I’m looking for the bearing housing on a 1960 Johnson 10 HP QD-21. I think the part number is 377186.

Any help you can give me would be appreciated.

Thank you,

Capt. Michael J. Lenzuolo

Master Captains License 100 Ton

Cell# 508-397-6655
February 22, 2023 at 11:25 am #273026
Bob Wight
Participant
US Member
That part is getting harder to find for anything less than a small fortune. Last time I needed one of those, I found one for a great price at Tim’s Outboard:

timsoutboard.com

218-682-2331

You might occasionally find a used one on Ebay for a decent price, but new old stock pieces are usually over $100.

Bob

1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20

“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."
February 22, 2023 at 11:28 am #273027
MICHAEL LENZUOLO
Participant
US MEMBER PAY BY CHECK
Thank you..
February 22, 2023 at 11:31 am #273028
aquasonic
Participant
The part has been upgraded to 0382282.

Evinrude Johnson OMC 0382292 – Housing Assembly and Seal (marineengine.com)

With the price of $148.99, better to look for a good used one, or a decent parts motor. These are somewhat delicate cast parts.

Improvise-Adapt-Overcome
February 23, 2023 at 1:10 pm #273076
ede
Participant
US MEMBER PAY BY CHECK
Have several used pieces that have been set up with new bushings. Ed Elliott eddelliott@cox.net
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.