Home › Forum › Ask A Member › 1972 Evinrude hard starting.
stop pulling use a drill and a socket. then you can play with carb adjustments while turning it over
OK, well a 1978 6hp has CDII ignition, no points…
Would anyone happen to know where I should line up the roller on the timming marks. Two lines about 1/ 2 inch apart. It is currently on the starboard side of the second line. Going to pull head tomorrow and check gasket. Thanks….
When you opt to “Remember Me”, WordPress will tell your browser to save the state of pages when you navigate away from them. This allows them to be restored instantly when you use the back and forward buttons in your browser.
OK
.
