1975 4HP Evinrude M:4636M

Home › Forum › Ask A Member › 1975 4HP Evinrude M:4636M

Viewing 10 posts - 1 through 10 (of 13 total)
1 2
  • Author
    Posts
  • March 12, 2022 at 1:12 pm #256101
    Fred Hickman
    Participant

      AOMC People:   I need a complete recoil assembly for an Evinrude 4HP, Model: 4636M.  Used, or new-old-stock will be fine.  You may email, or text me.        In addition, I need a side jacket plate and fuel pump to convert my Fastwin from the double hose to single hose.  Also need same to convert my 7.5HP Evinrude (Something-Twin).   H5458@Comcast.net,  OR.   856-466-8419  Best regards. Fred in NJ.  

      • This topic was modified 3 years, 10 months ago by Fred Hickman. Reason: Because I am mistake-prone
      March 12, 2022 at 2:10 pm #256114
      crosbyman
      Participant

        Canada Member

        i think your  keyboard  is stuck on size 40  and bold… no need   regular size 12 is fine

         

        fuel pumps are all over  the internet and dealers  same for side connectors

         

        Joining AOMCI has priviledges 🙂

        • This reply was modified 3 years, 10 months ago by crosbyman.
        • This reply was modified 3 years, 10 months ago by crosbyman.
        March 12, 2022 at 3:39 pm #256123
        Fred Hickman
        Participant

          Size 12, ….. roger that.

          March 12, 2022 at 9:03 pm #256163
          Anonymous

            I kinda like a bigger font.

            March 13, 2022 at 4:07 pm #256192
            Michael Anfossi
            Participant

              International Member

              I have the recoil, but doubt you want to pay the shipping as I am in Bermuda. Be in Boston in 10 days, so could take there and mail from there potentially if you still need it.

               

              March 14, 2022 at 10:00 am #256214
              Fred Hickman
              Participant

                How much $$ do you want for it?

                March 14, 2022 at 11:08 am #256222
                crosbyman
                Participant

                  Canada Member

                  what is wrong with the existing recoil or is it missing completely ???

                   

                  one missing washer will mess them up but can be serviced

                  Joining AOMCI has priviledges 🙂

                  1 user thanked author for this post.
                  Fred Hickman
                  March 14, 2022 at 9:47 pm #256260
                  Michael Anfossi
                  Participant

                    International Member

                    $15 plus the ride.  Where are you located?

                    March 15, 2022 at 11:34 am #256272
                    Fred Hickman
                    Participant

                      Fred Hickman, 1052 Carmel Road, Millville, NJ 08332.   When you learn the cost of the ride, advise me where to send the “loot”.

                      March 15, 2022 at 11:35 am #256273
                      Fred Hickman
                      Participant
                        crosbyman wrote:

                        what is wrong with the existing recoil or is it missing completely ???

                         

                        one missing washer will mess them up but can be serviced

                        The recoil was missing when I bought the motor.

                      • Author
                        Posts
                      Viewing 10 posts - 1 through 10 (of 13 total)
                      1 2
                      • You must be logged in to reply to this topic.