2 questions I need help with please…

This topic has 4 replies, 4 voices, and was last updated 4 years, 7 months ago by huntleybill.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
May 17, 2021 at 1:47 pm #238497
huntleybill
Participant
1. Who is the guy that makes the Mercury fuel lines. I lost his info.

2. There was an article in a past magazine about a one way ratchet for use on a drill to spin start motors. Does anyone have a link to that tool?

Thank you in advance.

Bill
May 17, 2021 at 4:48 pm #238502
dave-bernard
Participant
US Member
Chris -Woody58 in Canada. 1 905 775 9368.
May 17, 2021 at 5:25 pm #238505
Bob Wight
Participant
US Member
On the one way ratchet, just do a google search for “ratchet adapter”. There’s a multitude of options and prices. Here’s one I picked off Amazon, but there are many more.

https://www.amazon.com/breaker-bar-ratchet-adapter/s?k=breaker+bar+ratchet+adapter

Bob

1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20

“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."
May 17, 2021 at 6:33 pm #238512
wbeaton
Participant
Chris Pichler is the guy you are looking for. He’s a great guy with EOM quality Mercury fuel lines. You can reach him via email at Duskdesign@rogers.com.

Wayne
Upper Canada Chapter

uccaomci.com
May 17, 2021 at 7:43 pm #238514
huntleybill
Participant
Thank you all for the info.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.