41′ Sea King "midget" carb interchangablitly

Home › Forum › Ask A Member › 41′ Sea King "midget" carb interchangablitly

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 15, 2015 at 8:41 pm #2983
    terriblecj
    Participant

      Did Evinrude use this same carb on other engines? It seems similar to my Ranger carb but wasnt sure if it was exclusive to this motor or not. My Sea King is a model 8022A (I think…). Thanks for any insight.

      CJ

      November 16, 2015 at 2:25 am #27167
      jasonh
      Participant

        Pretty sure Pal and ranger shared carb.

        November 16, 2015 at 1:30 pm #27194
        Tubs
        Participant

          A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

          • This reply was modified 6 years, 8 months ago by Tubs.
          • This reply was modified 4 years, 5 months ago by Tubs.
          November 16, 2015 at 1:55 pm #27197
          terriblecj
          Participant

            I think I should clarify….I have an evinrude built sea king with a broken carb. Looking to replace but was hoping there was a more common motor the same carb could be found on. Thanks again for the responses. I’m a known thread-killer here so I rarely post much. I guess I just have bad luck..

            November 16, 2015 at 2:27 pm #27199
            Tubs
            Participant

              A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

              • This reply was modified 6 years, 7 months ago by Tubs.
              • This reply was modified 4 years, 5 months ago by Tubs.
            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.