Home Forum Ask A Member ’51-’52 Evinrude Fleetwin 4443

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #3827
    Goman
    Participant

      Could someone send me or post a picture of the fuel mixture decal that goes on the back of the fuel lid. I may be able to print it and attach it somehow. It didn’t like the lacquer thinner so well 🙁

      The good news is I didn’t do it to the other one. It cleaned up and I misted it with a few coats of Dupli Color clear. 🙂 I’ve painted a couple of fuel tanks before but this will be my first time painting an outboard so any tips on paint and decals would be welcomed. Thanks Glen

      #33344
      PugetSoundBoater
      Participant

        Pm me your email and I will send a photo of mine off of my 1950 7.5.

        "Some people want to know how a watch works, others just want to know what time it is"
        Robbie Robertson

        #33364
        Tubs
        Participant

          Never set anything on a surface that is in the
          process of be painted. There is no telling
          what is on the bottom of the cap. If in a few
          weeks after it is painted a circle should appear
          you’ll know where it came from. Only fresh
          out of the box lint free paper towels should be
          used to wipe the surface being painted. Once
          you set a towel down it should only be use for
          something else. Even freshly washed rags can
          have detergent or conditioners remaining in
          them that can cause a paint job to blow up.

          A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

          #33371
          Goman
          Participant

            Thanks Tubs. I’ll have to clean up my act.
            The cap in the picture was an attempt to come up with a good color match.
            Looks like I’ll have to break down and buy the good stuff.
            The local auto supply can mix spray paint if I can come up with a color code.
            I guess that secret recipe would be hard to come by from what I’ve read.

            #33375
            chris-p
            Participant

              I buy mine here. At $15.95 Canadian a can, that is under 12 bucks US for you per can. I doubt a paint shop would mix it that cheap, and put in a can for you, so why not just buy it done? His paint lays down nice, and is a nice match.

              http://www.nymarine.ca

              Prep is key, and you will never stop learning all the little prep tricks along the way!

              A painter taught me another neat little trick the other day. He watched me mask a cowl, then put my roll of tape down on my work bench. He grabbed my magnifying glass, and showed me all the junk the edge of the tape picked up, which would have caused "bleeding" of colours when I sprayed the final coat. So now, I keep my tape in a plastic zip lock container, to keep the edges of tape clean from debris to give me a nice clean crisp paint line on two tone paint jobs.

              #33377
              wedgie
              Participant
                #33381
                Goman
                Participant

                  Thanks Wedgie! Nice picture. Good tip to. Here’s a picture of how you shouldn’t treat your tape

                  😮

                  #33391
                  scoot
                  Participant

                    One owner (second owner counting me) 1952 Fleetwin. Mod.# 4443, ser.# 70989. Bought last year.

                    Scoot


                    Attachments:

                    #33394
                    Goman
                    Participant

                      Another good picture. Thanks!

                    Viewing 9 posts - 1 through 9 (of 9 total)
                    • You must be logged in to reply to this topic.