Choke solenoid rubber boot

Home › Forum › Ask A Member › Choke solenoid rubber boot

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 25, 2022 at 7:42 pm #253425
    GUY SCHMIDT
    Participant

      US Member

      I’m trying to replace this boot on my 1957 35hp Johnson….it looks like the shaft might unscrew to remove the boot but it looks fragile and I don’t want to ruin it…..Have any of you replaced this and if so, what techniques?

      January 25, 2022 at 8:28 pm #253427
      johnny
      Participant

        US MEMBER PAY BY CHECK

        I have replaced the boot on my 1957 Evinrude 35 HP motor. The boot just slips over the outside of the solenoid body then the boot has to be starched to get it out of the groove on the solenoid shaft. Those boots are hard to come by.

         

        • This reply was modified 3 years, 11 months ago by johnny.
        January 26, 2022 at 7:35 am #253433
        GUY SCHMIDT
        Participant

          US Member

          Thanks Johnny

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.