Elto 12hp what is there to know about it ?

[crosbyman]

see one on for sale at 75$ …..

Joining AOMCI has priviledges 🙂

[Mumbles]

Is it the same as this 1950 direct drive Speedster? Later models had F-N-R.

https://youtu.be/-FMOG4VXut8

[crosbyman]

no it has conventional mid 50 white carb knobs looks a bit like a qd-fd blue sides white strip centered on cowl

Joining AOMCI has priviledges 🙂

• This reply was modified 6 years, 1 month ago by crosbyman.

[wbeaton]

Sounds like a 1956. I’m passively looking for one of those. Decent motors. Not much to say about it. Its a Gale built motor. Single line tank.

Wayne
Upper Canada Chapter

uccaomci.com

[crosbyman]

2 hour drive from Ottawa if interested go for it …confirm with seller first !!!

https://www.kijiji.ca/v-nautique-autres/lanaudiere/moteur-hors-bord-12-hp-prix-de-debarras/1425914976?enableSearchNavigationFlag=true

Joining AOMCI has priviledges 🙂

[wbeaton]

Thanks Crosbyman. Just a little too rough and a little too far. I’m after a nice original. $75 is a good price though. I may know a guy who might be interested.

Wayne
Upper Canada Chapter

uccaomci.com

[frankr]

Lots of info and manuals on the Viking site (same motors)
http://www.richardlpaquette.ca/Vikings.htm

[Phil Budne]

The Elto name was used for direct sales of Gale models in Canada (like Buccaneer in the U.S.)

Here is what I have for 12hp Elto Speedster years and models (my comments in parens based on US models):
1950 C2E8 — C for Canada, E for Elto (Direct Drive, Wedge Head)
1951/53 12D10E — E for Elto (FNR, Wedge Head, Tank on top)
1951/53 12D10E
1951/53 12D10E
1954 12D11E (FNR, bolt-on cyl head, tank on top AND fuel pump!)
1955 12D12E (??)
1956 12D13E (FNR, remote tank only)
1956 12D14E
1957 12D15E
1958 12D17E

http://www.omc-boats.org
http://www.aerocraft-boats.org

• This reply was modified 6 years, 1 month ago by Phil Budne.

[adam1961]

J: Good motors. I have the Viking version. If you buy that one, I know where there is another one for parts.

[crosbyman]

ok thanks all for the info …

Joining AOMCI has priviledges 🙂

[Author]

Posts