Fiber shims for Mercury Mark 6.

Home › Forum › Ask A Member › Fiber shims for Mercury Mark 6.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 17, 2019 at 6:15 pm #167450
    Henry Withers
    Participant

      US Member

      Does anyone know of a good resource for the lower unit on the Mark 6 ? I am just about complete with a restoration and can’t get the proper TQ on the shim pack. I think the shims I have on it are shot.
      Thanks.
      Henry

      February 17, 2019 at 6:40 pm #167453
      DAVID
      Participant

        US Member

        clean them good with thinner and dry them add a washer under the spring you should be good. 1 914 310 7086.

        February 18, 2019 at 10:49 am #167503
        mercuryman
        Participant

          Also check parts list see if you have the right number.

          February 20, 2019 at 7:16 pm #167714
          Henry Withers
          Participant

            US Member

            Thanks for the feedback. I will soak them in laquer thinner, re- count and giver another try.
            Really appreciate it.
            Henry

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.