Gale model 12D10 – 12hp Viking 1953

Home › Forum › Ask A Member › Gale model 12D10 – 12hp Viking 1953

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 8, 2016 at 5:10 pm #3994
    billy-t
    Participant

      Hi Fellows

      Just getting this nice old viking water ready. Could use some advice on what to do to change out the impeller.

      It looks like you access the shift rod through the plate that ties into the exhaust tube, but I don’t want to take out the wrong screws. Any pointers would be appreciated.

      Thanks

      Bill

      April 8, 2016 at 5:51 pm #34533
      wagemaker
      Participant

        You can download the Gale manual from Richard Paquette’s site at: http://www.richardlpaquette.ca/GaleProd … Manual.pdf.

        Page 236 on the PDF has the procedure. It simple. Good luck and thanks to Richard.

        Dale

        April 8, 2016 at 7:00 pm #34536
        billy-t
        Participant

          I know it looks fairly simple, but not as simple as I am!

          Some coaching would be appreciated.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.