Gamefisher coils

Home › Forum › Ask A Member › Gamefisher coils

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 29, 2015 at 1:12 am #2662
    drifter
    Participant

      I’m in the process of dismantling a Sears Gamefisher 9.9hp (Model# 225.587991) to either give away or sell the parts. This motor is very foreign to me as I have only worked on 50’s and 60’s OMC motors for many years. I have an ad on webvertize right now to give away any parts someone might need.
      My question: how the heck do you remove the coils from the mag-plate? They appear to be held by two pins which pass through the coil and plate. I see no screw or bolt heads and can see no way to remove these coils from the pins.
      Thanks,
      Drifter

      October 1, 2015 at 4:07 pm #24968
      jasonh
      Participant

        They are riveted, you don’t remove laminate. You bend tab down and remove coil. Replacement coils were coils without laminates. Some engineer finally came along and said why are we replacing laminates with coils…Just replace coils.

        http://www.seawaymarine.com/OemParts#/Mercury_Marine/9.9_H.P._(1986-1987)_225.587991_(SEARS)/Magneto/12-002-FOB4120-200/FORCEFOB41202014A

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.