Michigan Wheel for 62 Evinrude 10 hp?

Home › Forum › Ask A Member › Michigan Wheel for 62 Evinrude 10 hp?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 30, 2016 at 4:11 am #3515
    willthur
    Participant

      I have a 1962 10 hp Evinrude on an 8 foot speedster I built myself. It needs a higher pitch propeller, and I’d like to know if there were any, maybe a bronze Michigan Wheel? I don’t have access to any old Michigan Wheel catalogs, so I’m hoping that someone will help me out by looking it up for me. The application is ’58-’63 10 hp, and also ’64-’73 9.5 hp. Dia. is 8-1/4", and I’d like about a 10" pitch, ideally 2-blade. If I had the part numbers, I could watch for one on eBay. Thanks, Will Thur

      January 30, 2016 at 5:58 am #31049
      retiredoz
      Participant

        Michigan lists AJC175 two-blade brass 8 X 10 for light loads.

        January 30, 2016 at 4:19 pm #31075
        willthur
        Participant

          Thank you, Retiredoz, that is just the information I need. — UpNorth

          January 31, 2016 at 7:11 am #31098
          retiredoz
          Participant

            No problem ! Hope one turns up for you.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.