Now for something totally different…

[todd281]

I am working on a Mercury KD-4 that I couldn’t pass up, I wanted to check the impeller.. its different from what I have seen as being the norm so I thought I would post it here. Its a wobbler type setup . I am wondering if anyone has part #.s for the “impeller”. It does not look bad, but I like to have parts if I need them. [Just in case] Thanks

[opposedtwin]

I believe joe poole has them.

[todd281]

Any contact info on Joe Poole?

[Ralph Simmons]

hello
reading your post did some internet surfing is this what your looking for ?
found this by tying in mercury kd4 impeller good luck

http://fergusonpoolemarine.com/

Outboard Motor Parts – Ferguson-Poole, Inc.www.fergusonpoolemarine.com › outboardmotorparts
Please contact Joe Poole, Jr. at info@fergusonpoolemarine.com for more … New Old Stock Mercury KB4, KB5, KD4, KD4S, KE4, & Mark 7, and Wizard WB4, …
You’ve visited this page 3 times. Last visit: 10/7/20

[opposedtwin]

Thank you for posting the link Ralph. Didn’t have it in front of me at the moment. Joe is a straight shooter and is super helpful.

Todd281, I apologize for not adding the contact info. Good luck with your kd4. Thanks for sharing your efforts and please keep us posted as you move forward.

Scott

[green-thumbs]

Oscillator Part # is 47- 24427 (revised) same part for either type oscillator type water pump.

Impeller (vane type) is Part # 47-24447

[todd281]

Thank you for the contact info, I added to my bookmarks and will be contacting him . I will post some pictures as I go along with this restore, this is my first Mercury and the part numbers that i have seem to be outdated . Thanks Again

[Author]

Posts