Part #

[Carlasdaddy]

Does anybody have the part number for a carb kit for a 1951 Evinrude Fastwin 14hp please?

[frankr]

I don’t think Evinrude ever produced a kit for that one. Tillotson probably did, who knows?

[Mumbles]

If you can get the model number (MD 42B?) off your carb, these guys might have what you need.

http://discount-marine-parts.com/tillotson_md.html

• This reply was modified 4 years, 8 months ago by Mumbles.

[outbdnut2]

Like Mumbles said, it should be an MD-42B and here is the kit (at the site, scroll down a bit and it says it fits MD-42):

https://www.dicarbparts.com/custom-carburetor-kits/55-tillotson-md112-md113-md115-md118-md131-md138-md141-md144-md145-carb-kit-.html

If the seal-coating is bad on the float, you will have to replace or recoat it. Can recoat with superglue, or clear hot fuel proof model airplane “Dope”. Some guys have had problems getting the DOpe to adhere well, but it has worked OK for me. If you call discount marine, they may have a float for it.

Dave

1 user thanked author for this post.

Carlasdaddy

[Carlasdaddy]

Thank y.u for your help

[Author]

Posts