Recently added, need info

Home › Forum › Ask A Member › Recently added, need info

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 2, 2021 at 7:52 pm #235460
    LYNN STRUB
    Participant

      Just found and added to my collection 3 outboards. One is a LYNITE apposed cylinder, one is a SOUTH BEND MOTOR CO OUTBOARD MORTORS CORP .apposed cylinder, and the third is a
      JOHNSON #A6414 apposed cylinder. Can anyone tell me when these were made. Also would like to know where the LYNITE was made.

      April 2, 2021 at 8:17 pm #235462
      stanley
      Participant

        US Member

        Lynite is the aluminum alloy Johnson used for cast parts.The one marked South Bend sounds like an OMC model, and #6414 is a late 1923 motor.I assume all 3 are Johnsons.The rope plate on top of the flywheel should have model stamped.Pictures would verify ID.

        • This reply was modified 4 years, 7 months ago by stanley.
        May 3, 2021 at 12:05 pm #237579
        LYNN STRUB
        Participant

          Sorry for the delay in answering I am up in WI and wont be back to FL till May 27?. Will take pics and send them to you then. Thanks

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.