Home Forum Ask A Member scrolling thru the forum

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #254655
    Hugh Davis
    Participant

      Good morning,

      I’m scrolling thru the forum to try to find info on a couple engines new to me. I started at 748 a night or 2 ago and am now down to 603. is there a way I can get more than 15 threads to pull up per page. at this rate it will be a couple weeks before I get to the present.

      fun, but a serious time suck, and the chief is starting to get irritated that I’m not making money.

      #254694
      Bob Wight
      Participant

        US Member

        You could just post specific questions about your motors under the Ask a Member section.   Always helpful to include year, make, model information and pictures of your motor along with any pics showing the part or system you are seeking information for.

        Another approach is to use the search box and type in what specific information you need and see what the search finds for you.   When using the search feature, go to the Forums home page and use the search box on the left side just above the “Forums” notation.   Don’t use the  search box at the far upper right corner of that page, as it doesn’t work well.

        Bob

        1937 Champion D2C Deluxe Lite Twin
        1954 Johnson CD-11
        1955 Johnson QD-16
        1957 Evinrude Fastwin 18
        1957 Evinrude 3022
        1958 Johnson QD-19
        1958 Johnson FD-12
        1959 Johnson QD-20

        “Every 20 minute job is only a broken bolt away from a 3-day project.”
        "Every time you remove a broken or seized bolt an angel gets his wings."

        #254721
        Hugh Davis
        Participant

          Thanks Bob, I tried that but the subject matter I put in did not display results

          I entered OMD 4156 and nothing came up, but scrolling thru the threads I found a couple threads that were talking about them.

          the scrolling has been productive mind you, I’ve found sources of info like Gannon and Penn and Art Dekalb and now have a parts catalog on the way!!

          appreciate the prompt reply!

          Have a nice evening

          Hugh

          #254754
          AOMCI Webmaster
          Keymaster

            US Member

            https://www.aomci.org/forums/topic/site-search-bar-question/

            Travis
            VP Communications AOMCI
            webmaster@aomci.org

          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.