Sometimes simple isn't so simple.

Home › Forum › Ask A Member › Sometimes simple isn't so simple.

Viewing 5 posts - 11 through 15 (of 15 total)
1 2
  • Author
    Posts
  • March 19, 2019 at 1:27 pm #171518
    stanley
    Participant

      US Member

      Original instructions say 1 1/2 turns out.I start mine 1 turn out.As they often say,”Individual results may vary.”This shows mag lever position to start and run.

      March 19, 2019 at 6:51 pm #171544
      Tubs
      Participant

        A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

        • This reply was modified 4 years, 4 months ago by Tubs.
        March 28, 2019 at 11:28 am #172131
        Tubs
        Participant

          A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

          • This reply was modified 6 years, 3 months ago by Tubs.
          • This reply was modified 4 years, 4 months ago by Tubs.
          March 28, 2019 at 12:03 pm #172135
          stanley
          Participant

            US Member

            All it says is .020 is the gap.I have a 72 T and it only has one screw holding the points bracket.So not much choice.

            March 29, 2019 at 5:02 pm #172253
            eviltwin
            Participant

              I like his float testing setup.

            • Author
              Posts
            Viewing 5 posts - 11 through 15 (of 15 total)
            1 2
            • You must be logged in to reply to this topic.