Home Forum Ask A Member starting a Johnson MS39

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #5690
    jaggerfire
    Participant

      Just bought a Johnson MS39, (based on the serial no.) was told that it runs, but i can’t read the decal and have now other knowledge on starting procedures. Any help would be appreciated

      #48175
      ERROL STILLINGS
      Participant

        US MEMBER PAY BY CHECK

        You have a gem. I too purchased one last spring, lacking tank, spark plug cover, fuel line to carburetor, and lever on magneto. I have
        not been able to find any of these, so if you have a complete one, you are ahead of the game. Gas/oil mix is 8 oz of oil to one gallon of
        gas. Advance magneto to right, choke is lever on left and throttle lever is on tiller handle. Pull rope sharply, and after it starts, reduce
        choke as it warms up.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.