1956 Johnson 10 hp QD-18

Home › Forum › Ask A Member › 1956 Johnson 10 hp QD-18

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 21, 2019 at 3:56 pm #177716
    jukeboxtim
    Participant

      Having a hard time figuring out where the spring on the cam follower connects to. I have it hooked to cam follower ok but don’t see where the other end connects .Photos would help. Thanks Tim

      • This topic was modified 4 years, 10 months ago by jukeboxtim.
      June 21, 2019 at 5:17 pm #177718
      bobw
      Participant

        US Member

        A 1956 model would be a QD-17, so not sure if you have a QD-17 or QD-18. The cam follower spring on my 1958 10hp hooks to the magneto support plate (the brass ring under the mag plate). Photo included here.

        IMG_5503

        Bob

        1937 Champion D2C Deluxe Lite Twin
        1954 Johnson CD-11
        1957 Evinrude Fastwin 18
        1958 Johnson QD-19
        1958 Johnson FD-12
        1959 Johnson QD-20

        “Every 20 minute job is only a broken bolt away from a 3-day project.”
        "Every time you remove a broken or seized bolt an angel gets his wings."

        • This reply was modified 4 years, 10 months ago by Mumbles.
        June 21, 2019 at 5:53 pm #177721
        jukeboxtim
        Participant

          Bob. Thanks for the quick response and great photo this helps greatly. Thanks Tim

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.