1953 Super Fastwin Seal question

Home › Forum › Ask A Member › 1953 Super Fastwin Seal question

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • September 27, 2016 at 4:35 pm #5369
    david-bartlett
    Participant

      I am in need of a drive shaft seal for my Evinrude Super Fastwin, Model 15012.

      My parts list gives an old number of 41A62. Anyone have a new number for this.

      Also, would someone have a part number for the BRP carb kit with float?

      Thanks in advance!

      September 27, 2016 at 5:04 pm #44815
      fisherman6
      Participant

        US Member

        Hi Dave,
        I believe the drive shaft seal number is 321788. The BRP carb kit with float is 439071.
        -Ben

        OldJohnnyRude on YouTube

        September 27, 2016 at 5:29 pm #44818
        outbdnut2
        Participant

          US Member

          The 321788 seal was a house number for Evinrude made by Chicago Rawhide. They were bought by SKF. The current off the shelf SKF seal is number 4950.

          Here is the site to look up these seal cross-references:

          http://www2.chicago-rawhide.com/popup_parts_lookup_457012.htm

          September 27, 2016 at 10:31 pm #44826
          chris-p
          Participant

            or sierra 18-2032

            I do not recommend the skf seal. It is made of steel. Anyone see a problem with this!? lol

            Put one in then check it in a year, it will be gone. I know this because I used to sell them in my seal kits on my website. Had to refund a few that corroded. Will never make that mistake again. I only sell SS seals now in the kits, or rubber coated seals for the NLA brass seals.

            September 27, 2016 at 10:58 pm #44829
            jeff-register
            Participant

              US Member

              Chris,
              We all learn being in business. It’s the ones that don’t make it good that causes problems, Thanks for correcting!

              September 27, 2016 at 11:49 pm #44832
              david-bartlett
              Participant

                Thank you for the replies. Any takers on the carb kit question?

                September 28, 2016 at 3:04 am #44837
                fisherman6
                Participant

                  US Member
                  quote Fisherman6:

                  Hi Dave,
                  I believe the drive shaft seal number is 321788. The BRP carb kit with float is 439071.
                  -Ben

                  Hi Dave,

                  439071 😉

                  -Ben

                  OldJohnnyRude on YouTube

                  September 28, 2016 at 3:41 pm #44848
                  david-bartlett
                  Participant
                    quote Fisherman6:

                    quote Fisherman6:

                    Hi Dave,
                    I believe the drive shaft seal number is 321788. The BRP carb kit with float is 439071.
                    -Ben

                    Hi Dave,

                    439071 😉

                    -Ben

                    Ben,

                    Thanks for the gentle hint that I am an idiot.

                    Dave

                    September 28, 2016 at 4:26 pm #44849
                    fisherman6
                    Participant

                      US Member

                      It’s all good, Dave. 😉
                      -Ben

                      OldJohnnyRude on YouTube

                    • Author
                      Posts
                    Viewing 9 posts - 1 through 9 (of 9 total)
                    • You must be logged in to reply to this topic.