Flambeau ignition system

Home › Forum › Ask A Member › Flambeau ignition system

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 11, 2020 at 8:51 am #194514
    davyray72
    Participant

      I noticed that one of my wires was missing on a condenser. If I need to replace coils, wires, condensers, are there interchangeable parts from other companies that would work?

      Davy Ray Bennett

      February 11, 2020 at 9:35 am #194516
      Buccaneer
      Participant

        US Member

        I have a 5 hp Flambeau, but haven’t started on it yet.
        I believe they have Eisemann magnetos. Some of those
        magneto coils can be replace / adapted with other brand
        coils. Condensers just need to be the correct mfd rating,
        and physically fit, usually not a problem.

        I’m not sure if there’s current a Special Interest group leader
        for the Flambeau outboards, but believe there’s a link
        on the homepage to see.

        I’m interested myself on what’s under the flywheel.
        If you have your apart, photos would be very helpful!

        Prepare to be boarded!

        February 11, 2020 at 11:16 pm #194548
        davyray72
        Participant

          I need to figure out where to get compatible coils and condensers. These might work. I would hate to get out in the water and have them fail, though.

          Davy Ray Bennett

          February 11, 2020 at 11:19 pm #194550
          davyray72
          Participant

            Here’s a pic of the mag plate.

            Davy Ray Bennett

            February 12, 2020 at 12:04 am #194560
            Tubs
            Participant

              .

              A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

              • This reply was modified 4 years, 8 months ago by Tubs.
              February 12, 2020 at 12:05 am #194561
              Tubs
              Participant

                .

                A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

                • This reply was modified 5 years, 8 months ago by seakaye12.
                • This reply was modified 4 years, 8 months ago by Tubs.
                February 12, 2020 at 12:14 am #194562
                Tubs
                Participant

                  A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

                  • This reply was modified 5 years, 8 months ago by Tubs.
                  February 12, 2020 at 11:46 am #194572
                  seakaye12
                  Participant

                    US MEMBER PAY BY CHECK
                    Tubs wrote:

                    .

                    • This reply was modified 4 years, 8 months ago by Tubs.

                    SO Sorry Tubs; all three of those posts were un-explainably flagged as “Spam”. It is an on-going issue that the Web Design Team (The Paid Professionals) have been asked to remedy. Obviously the remedy has not yet been found….but please know that we are trying. Thanks again for all your valuable information; I really appreciate your willingness to share all your expertise with us!

                    February 12, 2020 at 1:13 pm #194584
                    jeff-register
                    Participant

                      US Member

                      I believe the coils & caps are electrically matched. Please keep that in mind for points lifetime.

                    • Author
                      Posts
                    Viewing 9 posts - 1 through 9 (of 9 total)
                    • You must be logged in to reply to this topic.