Home Forum Ask A Member Is this a good deal?

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #2776
    wyo307
    Participant

      http://fortcollins.craigslist.org/boa/5197665038.html

      I don’t know anything about martins. Thanks

      #25591
      al-lockhart
      Participant

        Canada Member

        In my opinion $50.00 for that pair of parts motors would be OK if you where working on Martins and needed lots of bits, otherwise I wouldn’t bother

        #25592
        wiscoboater
        Participant

          Take it from a guy that has a garage, basement and shed full of "good deals"… both motors and boats that I do not have enough life left to get to. Unless you want restore and keep them, let em’ go. This is a collecting hobby that can get carried away in a hurry.

          #25594
          bobprock4200
          Participant

            US Member

            I’d have to agree with Al. IF they were complete it might be a pretty good deal, but by the time you chase down the parts you need you might be better off finding one that’s complete. That being said, Russ Larson at martinoutboards.com has pretty much anything you’d need for a Martin. Overall, they’re good motors.

            #25600
            crosbyman
            Participant

              Canada Member

              9 motors in the garage 🙄 one boat to use them on as kickersalong side my 75 etec… 😆

              missing 8 boats 😳 now 65 years old… probably 10 more good years of usable time if al goes well.

              anything after 75 is a gift

              Joining AOMCI has priviledges 🙂

              #25621
              wyo307
              Participant

                Thanks guys that is what I was thinking. I have 5 motors right now not including my main motor on the boat so I am in the same situation as crosbyman I just enjoy bringing them back to life.

                #25659
                jeff-register
                Participant

                  US Member - 2 Years

                  I have way too many now. Wish I had the money I have in the too much ones. I wouldn’t give a plug nickel for both of them unless I had a use for two parts motors. Not enough time to do them all.

                  #25660
                  Buccaneer
                  Participant

                    US Member

                    I’d be tempted if they were close to me, as I don’t
                    have a Martin in my corral yet 🙂

                    Prepare to be boarded!

                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.