OMC seal installer number

This topic has 3 replies, 3 voices, and was last updated 2 years, 6 months ago by jeff-register.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
May 17, 2023 at 1:34 pm #276300
stanley
Participant
US Member
Does anyone know the part number for the OMC tool used to install top crank seal #305987?
May 17, 2023 at 2:24 pm #276303
Mumbles
Participant
Don’t know the tool P/N but I use a short piece of tubing squared off on both ends and slightly smaller in diameter than the seals OD to install them. A few taps with a hammer and Bob’s your uncle.
May 17, 2023 at 7:58 pm #276314
stanley
Participant
US Member
Found it #304722.In the past I’ve used an old,really deep socket I got somewhere.I can’t find the socket now so I’ll either find the official tool or make one like Mumbles did.
May 17, 2023 at 11:01 pm #276316
jeff-register
Participant
US Member
You might try Doug Penn. Haven’t contacted him in a few years but he is on the web under Penns outboards or something like that. Help guys please.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.