Home › Forum › Ask A Member › Converting a pressure tank to one line operation. › Re: Converting a pressure tank to one line operation.
April 19, 2018 at 11:17 pm
#74350
quote VinTin:
Thanks for the input guys. I would consider of course trading for single line tanks if the single tanks have as must aesthetic appeal. I haven’t seen any that do. My use and interest is for 18 hp and larger omc motors.
Still seeking input.
Thanks,
Dan N.
Dan, I made an adapter much as twostroke describes above. I have used this adapter with no problem on my 1967 Fastwin. I made my adapter for winterizing. I use 8:1 gas oil mix before fogging my motors for winter / long term storage. With the adapter, I can put the 8:1 in a 4 gallon pressure tank and I can run every remote tank motor I have from my 4 gallon OMC pressure tank. That way I don’t have several tanks sitting around with heavy oil mix in them. As it turns out, the adapter works great in the boat too.
-Ben
OldJohnnyRude on YouTube