1930's Piston Rings

Home › Forum › Ask A Member › 1930's Piston Rings

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 5, 2019 at 4:56 pm #170385
    hank1995
    Participant

      I have a nice 1935 Sportfour with good bores. This is a low hour engine and while I haven’t had the clearances checked yet I’ll be surprised if they are not in spec or close to it (3.5 to 5.0 thou) . I’d like to find new rings for it. 2.00 bore x 3/32 x 1/8. Is there a source? and if not, can I reuse the old ones after honing?

      Also, I really need an entire mag plate for this engine.

      Steve

      402 909 3538

      March 5, 2019 at 5:26 pm #170387
      Anonymous

        Otto Gas Engine Works Elkton MD 410-398-7340 You have to know the cyl. dia. , ring groove width , and ring groove depth.

        March 5, 2019 at 6:42 pm #170393
        The Boat House
        Participant

          https://search.yahoo.com/search?p=Otto+Gas+Engine+Works+&fr=yfp-t&fp=1&toggle=1&cop=mss&ei=UTF-8

          March 6, 2019 at 11:25 am #170423
          hank1995
          Participant

            Thanks – I’ve got that info and will contact them today. How about a mag plate? Leads appreciated.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.