Topic: 1958 Evinrude Fleettwin 7.5 – Page 2 – Antique Outboard Motor Club,Inc

This topic has 17 replies, 8 voices, and was last updated 6 years ago by Don.

Viewing 8 posts - 11 through 18 (of 18 total)

← 1 2

Author

Posts
October 9, 2020 at 8:46 pm #218221
JACQUES
Participant
http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1958&hp=7.5&model=AD-12

Joining AOMCI has priviledges 🙂

1 user thanked author for this post.

John Descaro
October 9, 2020 at 11:04 pm #218230
Don
Participant
US Member
No upper seal, just the crankshaft slinger…

1 user thanked author for this post.

John Descaro
October 10, 2020 at 8:52 am #218238
John Descaro
Participant
Is part# 303391 superceded by part # 305119 ( lower crank seal) Thanks
October 10, 2020 at 12:43 pm #218251
Mumbles
Participant
John Descaro wrote:

Is part# 303391 superceded by part # 305119 ( lower crank seal) Thanks

305119 is completely different and for another motor. 303391 is the correct carbon seal fo your motor.
October 10, 2020 at 2:05 pm #218260
John Descaro
Participant
Thank you, and is this seal necessary as there was none there when I tore it down…
October 10, 2020 at 3:45 pm #218265
frankr
Participant
Absolutely necessary. If it wasn’t there, it might be why you had to tear it down. The seal keeps water out of the crankcase. Water in the c/c will slowly destroy the motor.
October 11, 2020 at 11:22 am #218302
John Descaro
Participant
Are the mounts for the sides of the head/intake plate; (knobs w/rubber insert) to shroud available?
October 11, 2020 at 12:01 pm #218306
Don
Participant
US Member
I’m sure you can find them somewhere, perhaps used…. I think I have seen a set on ebay…

https://www.ebay.com/itm/0203654-0277368-mount-johnson-evinrude-fleetwin-7524-10hp-7-hp-7-4o/293397902857?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
Author

Posts