1958 Evinrude parts see picture

Home › Forum › Ask A Member › 1958 Evinrude parts see picture

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 14, 2019 at 4:05 pm #175270
    benji41
    Participant

      US Member

      Looking at the picture I need #84 part# 203474 and # 86 part# 203621. I am not sure what they do or how they fit into this assembly. I am try to get this motor up and running and continue to find parts missing. Posting info as I work on the motor.
      Thanks for all you help to this point still working on it.

      IMG_0514

      Jim Benjamin

      • This topic was modified 4 years, 11 months ago by Mumbles.
      May 14, 2019 at 4:21 pm #175272
      frankr
      Participant

        US Member

        Those two parts limit how far you can turn the knobs. In other words, prevent you from spinning them ’round and ’round.

        May 14, 2019 at 7:31 pm #175277
        RICHARD A. WHITE
        Participant

          Lifetime Member

          http://www.richardsoutboardtools.com
          classicomctools@gmail.com

          May 14, 2019 at 7:32 pm #175279
          RICHARD A. WHITE
          Participant

            Lifetime Member

            I know you think you need them, but in reality, unless you are meticulously restoring a motor back to factory…don’t bother, as Frank said, they only limit the movement of the adjustment needles.

            http://www.richardsoutboardtools.com
            classicomctools@gmail.com

            May 15, 2019 at 5:14 pm #175325
            benji41
            Participant

              US Member

              Thanks to all. I think I will wait till I get it running and see how it goes. I do not think I will need them.
              Thank You again

              Jim Benjamin

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.