Home › Forum › Ask A Member › 3/8 fitting does it fit gearcases on OMC
- This topic has 7 replies, 5 voices, and was last updated 4 years, 3 months ago by fleetwin.
-
AuthorPosts
-
December 9, 2019 at 11:34 am #189090
will these fit on OMC gearcases to test for pressure ex: 7.5 5hp 9.5 hp
if not can you point me to a supplier 3/8 16tpi is needed if I remember correctly
Joining AOMCI has priviledges 🙂
December 9, 2019 at 12:21 pm #189096NO. Pictured is tapered pipe thread. Need machine screw thread.
December 9, 2019 at 3:30 pm #189106Jacques, I made one using the metal fitting from a refill kit.
https://www.amazon.com/Plews-Edelmann-55-005-Marine-Lower/dp/B000PDIBF8/?tag=petsfunnies-20
https://www.amazon.com/Star-brite-Lower-Unit-Quart/dp/B000QGIT6K/?tag=petsfunnies-20
December 9, 2019 at 3:34 pm #189110https://www.stevensinstrument.com/GrcsAdptrs.htm
Look here for the adaptor
December 9, 2019 at 11:08 pm #189128Steve D …
thanks for PM
will look locally… I have a oiler pump but the fitting is loose on my oldies
I saw a kit at Canadian Tire with a second fitting which is likely 3/8 16tpi if so I will buy the pump and fittings
(always need a second pump for city and cottage work 🙂 )
thanks for the lead … I have the pressure meter 0-15 psi so I just need to rig it up with the fitting
Joining AOMCI has priviledges 🙂
December 9, 2019 at 11:08 pm #189098Jacques, I made one using the metal fitting from a refill kit.
https://www.amazon.com/Plews-Edelmann-55-005-Marine-Lower/dp/B000PDIBF8/?tag=petsfunnies-20
https://www.amazon.com/Star-brite-Lower-Unit-Quart/dp/B000QGIT6K/?tag=petsfunnies-20
December 11, 2019 at 10:06 am #189180you can buy the fittings from stevens, not expensive….
January 4, 2020 at 8:23 pm #189101Jacques, I made one using the metal fitting from a refill kit.
https://www.amazon.com/Plews-Edelmann-55-005-Marine-Lower/dp/B000PDIBF8/?tag=petsfunnies-20
https://www.amazon.com/Star-brite-Lower-Unit-Quart/dp/B000QGIT6K/?tag=petsfunnies-20
-
AuthorPosts
- You must be logged in to reply to this topic.