33 hp hood gasket material?

Home › Forum › Ask A Member › 33 hp hood gasket material?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 24, 2020 at 6:20 pm #209737
    amuller
    Participant

      I’m thinking about getting my 33 hp Evinrude running. Model 33552, 1965.

      The trim piece, or could call it a gasket, for the hood is missing entirely so I don’t know what it should look like. Without it the hood rattles around. Does anybody know what this material is and how to buy a length of it? Part number 204418/204908.

      July 24, 2020 at 7:33 pm #209744
      Bob Wight
      Participant

        US Member

        North York Marine, their gasket type 2.

        http://www.nymarine.ca/cowlgaskets.htm

        Bob

        1937 Champion D2C Deluxe Lite Twin
        1954 Johnson CD-11
        1955 Johnson QD-16
        1957 Evinrude Fastwin 18
        1957 Evinrude 3022
        1958 Johnson QD-19
        1958 Johnson FD-12
        1959 Johnson QD-20
        1982 Evinrude 25hp

        “Every 20 minute job is only a broken bolt away from a 3-day project.”
        "Every time you remove a broken or seized bolt an angel gets his wings."

        July 25, 2020 at 8:19 pm #209846
        amuller
        Participant

          Thanks. Expensive, but it looks like the right stuff.

          July 25, 2020 at 8:26 pm #209847
          Bob Wight
          Participant

            US Member

            $20 US doesn’t seem too bad. I’ve bought his gasket material on all my projects and it’s top quality stuff. Always fits perfect too.

            Bob

            1937 Champion D2C Deluxe Lite Twin
            1954 Johnson CD-11
            1955 Johnson QD-16
            1957 Evinrude Fastwin 18
            1957 Evinrude 3022
            1958 Johnson QD-19
            1958 Johnson FD-12
            1959 Johnson QD-20
            1982 Evinrude 25hp

            “Every 20 minute job is only a broken bolt away from a 3-day project.”
            "Every time you remove a broken or seized bolt an angel gets his wings."

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.