35 HP Evinrude upper seal replacement

Home › Forum › Ask A Member › 35 HP Evinrude upper seal replacement

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 5, 2019 at 10:44 pm #170407
    gofastgramps
    Participant

      US Member

      The top seal on a 02534 35 HP seems to be leaking a little. There is some oil residue on top of the block and some on the mag plate.
      can the seal be removed with the motor still together? Also is a 321467 seal the correct one? Thanks

      March 5, 2019 at 11:09 pm #170409
      Eric McNett
      Participant

        What is the year and Model# ?

        Eric McNett
        Seattle AOMCI Member

        March 6, 2019 at 5:17 am #170412
        phil
        Participant

          US Member - 2 Years

          25034 would be a 1958 35hp (bigtwin?)

          http://www.omc-boats.org
          http://www.aerocraft-boats.org

          March 6, 2019 at 6:55 am #170413
          frankr
          Participant

            US Member

            If you are talking about a 1958. the original seal was 305987, now replaced by 0767970. Yeah, you can dig the old one out, often in pieces, but the job is a whole lot easier with the special tool. richardsoutboardtools.com makes repro tools.

            March 6, 2019 at 8:35 am #170416
            RICHARD A. WHITE
            Participant

              Lifetime Member

              I sure do have those… http://www.richardsoutboardtools.com

              http://www.richardsoutboardtools.com
              classicomctools@gmail.com

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.