Home Forum Ask A Member 6ND 1957 champion sweet sixteen outboard

Viewing 10 posts - 1 through 10 (of 11 total)
  • Author
    Posts
  • #250095
    Dana Brown
    Participant

      Is there any value in restoring this champion motor?

      #250100
      The Boat House
      Participant



        Absolutely. There are those who have a
        strong interest in them.
        Tubs

        #250111
        Dana Brown
        Participant

          If I can get here running what would be the value?

          #250112
          The Boat House
          Participant



            In the antique outboard hobby “most” motors
            don’t have an excepted value. That’s because there
            isn’t a lot of people interested in them but the
            greatest interest is in these 50′ & 60’s motors.
            It just that the number is small and their value
            varies from person to person so they are only
            willing to pay what its worth to them. Pricing
            is more about interest. A low price, say $100.00,
            should generate a lot of interest. $800.00 likely
            won’t generate any interest at all, taking in
            condition and location. I have an interest in
            them but I understand the lower unit is
            problematic and parts are hard to come by so
            I wouldn’t give you very much for it. How much
            effort are you will willing to put into reaching
            those who would be more interested in it than me?
            That’s not a motor that is easy to come by. I’ve
            only seen one of them sell so I cant give you an
            estimate of what some might pay however getting
            it running will likely bring you less money after
            you deduct what you spent to get it going.
            Someone interested in a motor in your condition
            is going to go through it anyway and they (me
            anyway) would be more interested in a motor that
            hasn’t been messed with.
            Tubs

            #250114
            outbdnut2
            Participant

              US Member

              I would love to have one of those 16s…..and I’d Kill for the dual setup (called tandem33) that’s in Tubs photo. I share the same thoughts about it that Tubs already posted, and prefer to fix one up myself, as that is the most fun part of the hobby for me. I used to be able to get Champion parts from Lyle Swanson, as he got the factory stock when they folded and had a repair shop her in Minnesota about 15 miles from me where I got parts for smaller models. In the late 1980s, Lyle told me he sold all the 16 HP parts and rights to produce the “Hotrod” class B racing version to a guy out east who was still building and selling the racing version. Lyle said he sold that off because he got tired of arguing with Mercury’s lawyers every time one of his Champion “Swanson Hotrods” beat a Mercury in a sanctioned race – which was pretty often! I don’t know if the guy out east is still building motors and/or selling 16 HP parts. Someone on this site should know if he’s still around, and know who he is. Lyle’s shop is long gone now.

              FYI: There is a Champion facebook group at: https://www.facebook.com/groups/551675555554500 If that link doesn’t work, go to facebook and type “Champion Outboard Motors” in the search box.

              Dave

              #250124
              The Boat House
              Participant



                A friend of mine had one that was in the family since new.
                He used it as a kid but it had been sitting for decades.
                Coils were junk so we did the OMC style coil up date
                and cut a new diaphragm for the fuel pump. Had a impeller
                made using the center from the old one. The power head
                is basically the same as the Hot Rod. Its the stuff below
                the power head that is hard to get if you need something.
                He ran his regularly for years until he sold his lake property.
                These pictures are dated 2004 so its been awhile ago.
                This little lever on the fuel line connector operates the choke.
                Hard to come by if you need one. Do you have the one for
                your motor? Also if this fitting is leaking use some sealer.
                Giving it another turn will split the pump. I do have a
                Hot Rod but I no longer bend in the places you need to bend
                to fit in the type of boat you put them on.
                Tubs

                #251583
                2fast4me
                Participant

                  There is a Sweet Sixteen sitting on the rack waiting on me i guess. Way back on the rack. Mine wears a Firestone brand.
                  You know that old sagging about “Sweet Sixteen and never been kissed” don’t you?.. Well this Sweet Sixteen had been kissed allot maybe even suffered some sort of trama or abuse.
                  What brand of magneto sits under the flywheel?

                  2Fast4Me

                  #251585
                  The Boat House
                  Participant

                    .

                    #251594
                    seakaye12
                    Participant

                      US Member

                      There is a Sweet Sixteen sitting on the rack waiting on me i guess. Way back on the rack. Mine wears a Firestone brand.
                      You know that old sagging about “Sweet Sixteen and never been kissed” don’t you?.. Well this Sweet Sixteen had been kissed allot maybe even suffered some sort of trama or abuse.
                      What brand of magneto sits under the flywheel?

                      A Sweet Sixteen Champion that wears a Firestone Brand? Can we see a picture?

                      #251602
                      2fast4me
                      Participant

                        Yes a picture can be had, unfortunately I’m in West Texas till after the first of the year then home to Wisconsin…

                        2Fast4Me

                      Viewing 10 posts - 1 through 10 (of 11 total)
                      • You must be logged in to reply to this topic.