9.6 Viking

Home › Forum › Ask A Member › 9.6 Viking

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 13, 2017 at 8:00 pm #7635
    dyreynol
    Participant

      Hi all,

      My first post here! Thanks for the add. I have an old 9.6 Viking (chrysler) and the pull cord will not recoil itself after pulling the motor over.
      Does anyone have any tips or ideas as to what it may be? I’m thinking it may be the spring, but won’t know until I start into the disassembly.
      Does anyone know if there are parts kicking around? We recently bought a hunting camp and I was really hoping to have a good little boat and motor for the lake!

      Dylan

      July 13, 2017 at 9:56 pm #61560
      frankr
      Participant

        US Member

        Does it look anything like this?

        July 13, 2017 at 11:30 pm #61565
        dyreynol
        Participant

          Hi Frank,

          That’s really similar! Any idea where I could get some of those parts of need be?

          July 14, 2017 at 2:03 am #61583
          b-dittmar
          Participant

            US Member

            Hear are the parts. http://www.marineengine.com/parts/force … 87a-models
            And this is a video I made on how to rebuild it.
            https://youtu.be/dalj5tk9Sb0
            https://youtu.be/Z3HH-6IaR7E

            July 21, 2018 at 12:02 am #79795
            dyreynol
            Participant
              quote B-Dittmar:

              Hear are the parts. http://www.marineengine.com/parts/force … 87a-models
              And this is a video I made on how to rebuild it.
              https://youtu.be/dalj5tk9Sb0
              https://youtu.be/Z3HH-6IaR7E

              Is there anyway to purchase the entire unit already assembled?

              July 21, 2018 at 11:28 am #79825
              billy-t
              Participant

                Likely only if you find some one selling a good used one. You can try the free classified here, ebay or one of the members might have one and be in touch with you about it. Everyone is good and helpful here.

                Good luck finding it

              • Author
                Posts
              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.