British Seagull replacement cdi high tension lead

Home › Forum › Ask A Member › British Seagull replacement cdi high tension lead

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 16, 2026 at 2:56 pm #328578
    GUY SCHMIDT
    Participant

      US Member

      How do you replace the high tension lead in the cdi models of the Seagull? It seems to be epoxied in.

      Before I experiment I’d like to hear from someone who has done it. Nothing worse than an experiment

      gone bad ! I don’t have any shop manuals for this either. The manuals I have are for the older points models

      so if you have this written info I would greatly appreciate it.

      September 16, 2026 at 3:06 pm #328580
      Michael Anfossi
      Participant

        International Member

        If you have the white ignition CDI. the HT lead screws in.  If you have the brown/black one, I do not think they are replaceble

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.